|
This cable tray with flanges in is best for supporting instrumentation, power and control cables of various diameters. It is particularly used by power plants, pulp and paper mills, petrochemical plants and industrial construction that require reliability and strength that may have limited space available. These cable trays are generally manufactured from aluminum, mill galvanized steel, HDGAF steel or stainless steel based on project needs. Powder coat finishes are also available.
TECHNICAL DATA
Depth: 3 3/8 inches, 4 inches, 4 1/2 inches, 6 inches and 6 1/4 inches.
Length: 10 feet (120″) standard. Also available in 20 feet (240″).
Width (inside): 6, 9, 12, 18, 24, 30 and 36 inches.
Rung Spacing: 6, 9 or 12 inches.
Materials: Aluminum Alloy 6061-T6 or 6063-T6, Stainless Steel, Mill Galvanized or HDGAF Steel. Painted, epoxy and other finishes are also available.
Fittings: 12, 24 or 36 inch radii (see the Cable Tray Fittings section of this catalog).
Splice Plates: Straight sections and fittings are supplied with splice connectors and hardware.
CATALOG NUMBER
A = Aluminum, P = Mill Galvanized, S = HDGAF Steel, 4 = 304 Stainless, 6 = 316 Stainless
BOTTOM DIMENSIONS
Standard Rung
Double Rung
Heavy Rung
HOW TO ORDER
Note: Insert Rung Space in Prefix, and then insert Width. All dimensions are in inches.
LOADING TABLES FOR LADDER CABLE TRAY
Note: The unit of Load is lb and Deflection is inch.
|
