|
For an integrated wire management system, Center Hung Cable Tray simplifies the support and routing of
power and telecom/teledata cabling. A single hanger rod is used at each support point.
This makes installation easier by reducing support requirements and eliminating the need to pull
cable through the trapeze supports. Center Hung Cable Tray provides substantial savings in cost and time.
With Center Hung Tray, cables can be laid in on both sides.
Both the support and connection of the Center Hung Cable Tray sections are accomplished by a single
splice coupling designed to save time. If additional support is needed beyond the 10 ft or
3 meter intervals, an intermediate support hanger can be used.
Center Hung Tray rungs come already attached transversely through either the top or bottom
of the center tubular rail. Each rung is securely staked to the center rail in four places,
providing additional strength and rigidity for reliable cable support. The chances for
damaging and losing rungs during transportation and cable installation are significantly
reduced with this safe, reliable and secure method of rung attachment.
Easy step 1, 2, 3 connections for fast and effective site installation:
Step 1 - insert rod in splice
Step 2 - connect center section to splice
Step 3 - slide together
TECHNICAL DATA
Depth:
6 to 24 inches.
Length:
10 ft (120″) standard.
Fill Depth: 3, 4 and 6 inches.
Rung Spacing:
3, 6, 9, 12 and 18 inches.
Materials:
Aluminum Alloy 6061-T6, 6063-T6.
CATALOG NUMBER
Style:
T = Center Hung Top Mount Rung,
L = Center Hung Bottom Mount Rung,
WT = Wall Mount Top Rung Single Tier,
WL = Wall Mount Bottom Rung Single Tier.
DIMENSIONS
Top Rung
Bottom Rung
TYPES OF CENTER HUNG CABLE TRAY
CENTER HUNG FITTINGS AND CONNECTORS
HORIZONTAL TEE/90° CONNECTORS
HORIZONTAL CROSS COUPLING
HINGE CONNECTORS
CENTER HUNG ACCESSORIES
WALL BRACKET
Rugged construction together with the ability to hang tray without any special clamps
makes this bracket an efficient and economical device.
Wall Bracket Catalog #
WALL MOUNT
This connector allows for a sturdy connection for short wall-to-wall runs.
Catalog Number: ASP-WALL
RAIL END CAP
Simplified one nut and bolt installation to close up end of spline.
Catalog Number: A E P - C R
BLIND END
Simple one nut and bolt installation. Please advise width and rung type (top/bottom) when ordering.
Catalog Number: A E P ( ) - W - D
( ) For Cable Tray:
Please insert T for Top Rung and L for Bottom Rung
( ) For Wall Rack:
Please insert TR for Top Right Hand, TL for Top Left Hand, LR for Lower Right Hand and LL for Lower Left Hand
CENTER HUNG COVERS
SOLID TOP COVER
Technical Data
Width: 6 inch to 24 inch
Length: 10 ft (120 inch) standard
Catalog Number
For top mounted rung: CACTF-W-120
For bottom mounted rung: CACLF-W-120
SOLID BOTTOM INSERT
Technical Data
Width: 6 inch to 24 inch
Length: 10 ft (120 inch) standard
Catalog Number
For top mounted rung: AST-W-D-120
For bottom mounted rung: ASL-W-D-120
|
