Hanging Supports for Cable Tray

• Hanger Clip for Ladder Tray
• Hanger Clip for Hefty Tray
• Double Hanger Clips
• Single Channel Hangers
• Double Channel Hangers
• Vertical Hangers for Cable Tray
• Vertical Hangers for Channel Tray
• Bevel Washers

Hanger Clip for Ladder Tray

The two-piece Ladder hanger is used in conjunction with the 1/2" hanger rod and eliminates the need for separate horizontal support members and hold down clips of a Ladder Tray.

Top of the Page

Hanger Clip for Hefty Tray

Two inch wide single hanger clips are used with the 1/2" hanger rod to hold hefty tray side rail firmly in place.

Top of the Page

Double Hanger Clips

Double hanger clips are used to connect the side rails of two side by side cable tray runs. Held with a 1/2" hanger rod having the top bolt included with each unit.

Top of the Page

Single Channel Hangers are used to support single 4" or 6" wide Instrument Channels from 1/2" hanger rods. The bottom support member, on which the channel rests, is drilled to accommodate HB-10 hold-down bolts.

Top of the Page

Double Channel Hangers

Double Channel Hangers support single or double, 4" or 6" wide Instrument Channels from 1/2" hanger rods. The support member, on which the channel rests, is drilled to accommodate HB-10 hold-down bolts, or SGB-GU expansion guide bolts.

Top of the Page

Vertical Hangers for Cable Tray

Vertical Hangers are used to support single type vertical ladders or troughs from 1/2" hanger rods. Each is furnished with the required mounting hardware.
Maximum allowable load:
250 lbs/unit

Top of the Page

Vertical Hangers for Channel Tray

This hanger assembly for vertical channel trays accommodates either 4" or 6" wide channels and is furnished with all necessary hardware, except for the top 1/2" hanger rod attachment to the building steel.
Maximum allowable load:
200 lbs/unit