Superior Tray offers a wide variety of cable tray covers that provide protection for the installed cables
from sunlight, environmental elements, dirt, debris, and other falling objects. All of the cable tray covers listed here
are suitable for both indoor and outdoor applications, being fabricated from corrosion resistant
aluminum, mill-galvanized, and 304 / 316 stainless steel. Although it is not recommended, covers
can also be supplied in HDGAF steel upon request although some distortion may occur during the galvanized dipping process. Most covers are
supplied in standard 10 foot lengths and are available in 5 foot lengths upon request.
Flat covers are economical and available for all straight
sections and fittings. These covers are available as flat cover
without flanges or flat cover with 3/8" flanges for Ladder Tray
and Hefty Tray. Flat flanged covers can be used on
all 4" and 6" wide channel applications requiring covers.

Louvered covers are available for all straight sections
and are available as Flat, Flat Flanged, or Hat Shaped.

Hat-shaped covers are designed to protect installations
where the cables extend above the upper flanges of the
tray. Hat-shaped covers are available with a flat solid
top as well as ventilated top and are in 2" or 4" height.

Ventilated covers are rigid, lightweight and will readily
form to vertical fittings, with the exception of Hefty Tray
style. These ventilated covers can be flat sheet type,
hat shaped type or hefty tray style. All covers for
horizontal fittings are made of non-ventilated (solid) flat
sheets without a flange.



Peaked covers are generally used to deflect falling
objects or to prevent the accumulation of snow or other
debris. Standard peak height is 1/2" however, higher
peaks are available upon request.
Peaked covers are not available for fittings.
