|
Instrument Channel Cable tray is a one-piece channel section, typically used to carry instrumentation,
control, data communication, computer or telephone cable. The channel section comes with
ventilated or solid bottom. This cable tray is designed to carry both single power cable and
multiple circuit cables.
TECHNICAL DATA
Depth:
1 3/4 inch outside with a loading depth of 1 5/8 inch inside.
Length:
10 ft (120″) standard. Also available in 20ft (240″).
Width (inside): 4 and 6 inches.
Materials:
Aluminum Alloy 6063-T6, Stainless Steel, Mill-Galvanized Steel, HDGAF Steel.
Painted, Epoxy and other finishes are also available.
Channel Bottom:
Ventilated or Solid.
Fittings:
12, 24 or 36 inch standard radii. All Fittings are non-ventilated.
Splice Plates:
Straight sections and fittings are supplied with splice plates and hardware.
Saftety Factor:
1.5 NEMA standard.
CATALOG NUMBER
A = Aluminum, P = Mill Galvanized, S = HDGAF Steel, 4 = 304 Stainless, 6 = 316 Stainless
HOW TO ORDER
LOADING TABLES FOR INSTRUMENT CHANNEL CABLE TRAY
Note: The unit of Load is lb and Deflection is inch. * Use 240 for 20ft length.
INSTRUMENT CHANNEL HORIZONTAL CROSS
INSTRUMENT CHANNEL HORIZONTAL TEE
Note: All dimensions are in inches.
|
