|
Basket Tray is a wire mesh style cable tray system designed for sensitive cable applications in the data
and communication industry. It utilizes high mechanical strength steel wire that is welded into a
2″ x 2″ grid system. This grid system is then formed into channels which support and carry
cables. By using Basket Tray's welded mesh, sensitive cables and fiber optics receive additional support
and are safe from any damage due to sharp edges.
TECHNICAL DATA
Depth:
2″, 4″ and 6″ or 50mm, 100mm & 150mm.
Length:
10ft (120″) or 3 meter standard.
Width (Inside):
2, 4, 6, 10, 12, 16, 18, 20, and 24 inches.
Materials:
Welded Steel Wire, Mill Galvanized; other materials available by request.
The 2″ x 2″ grid size provides support for cables every 2″
instead of every 4″ like other mesh trays on the market.
CATALOG NUMBER
LOADING TABLE FOR BASKET CABLE TRAY
* This chart is based on 50% fill of 4 UTP Category 5 cable (O.D. of 0.21 inch 0.026lbs/ft)
BASKET CABLE TRAY FITTINGS
HORIZONTAL 90° CONNECTOR KIT (SSP-90-2)
This kit uses our unique 90° splice connectors that maximize cable support while field cutting is
minimized by overlapping and clamping into place. Each Kit has 2 back plates, one L-shaped
plate, nuts and bolts.
T CONNECTOR KIT
Basket Tray T Connectors require 2 Horizontal 90° Connector Kits.
X CONNECTOR KIT
Basket Tray X Connectors require 4 Horizontal 90° Connector Kits to make a Cross.
Remove a section of each Tray side wall, overlap and connect.
SPLICE CONNECTOR (SSP-WB2)
Splice connectors are used to clamps 2 Basket Tray sections together effortlessly.
The inner ridged plate clamps vertical side wires to the outer L-formed plate
which also levels and supports the horizontal wire.
HOLD DOWN CLAMP (WBHDC)
Hold Down Clamps allow Basket Tray sections to be securely fastened into place.
SIDE HANGER CLAMP
For trapeze type supports, this clamp attaches 1/4 inch threaded rod to the side of the cable tray.
For 1/4 inch rod: WBVHC
For 3/8 inch rod: WBVHC-3/8
SUPPORTS AND CONNECTORS
UNDER FLOOR BRACKET
Superior Tray provides an L-bracket support for 2 inch to 24 inch wide Basket Tray that includes
a clamp, 3/8 inch x 1 inch square bolt and 1 WBHDC hold down clamp to attach to bracket.
Part No. WBUFB-(W)
W=width
UNDER FLOOR PAN SUPPORT
We provide a 6 inch Floor Pan Support that includes a WBHDC hold down clamp to attach the tray to
floor pan.
Part No. WBUFB-6
SEPARATORS/BARRIERS
Our Separators are available in 2 inch - 6 inch Heights and have been designed to be slotted at
regular intervals to facilitate installation. Drilling is not required.
Part No. S( )S-120-WB ( ) = Height
CENTER HANGER CLIP
With our Center Hanger Clips, all of our Basket Trays are installed in a true center hung position.
For 1/4 inch rod Part No. WBCHC
For 3/8 inch rod Part No. WBCHC-3/8
FLANGED COVERS
Flanged Covers are available for all Basket Tray widths. The WBCC cover clamp is available for
all depths.
Z BRACKETS
The Z Bracket is recommended to be used when attaching a Basket Tray to a wall, to an enclosure
or to the floor.
Part No. WB-Z
CENTER SUPPORT CHANNEL
TRAPEZE HANGER SUPPORT
|
