Introduction

is a system to distribute power from one location to another via parallel conductors.

It is is a completely engineered system consisting of fully continuous, insulated single conductor power cables mounted on nonmagnetic, self-extinguishing support blocks within a ventilated enclosure.

is supplied with all the required accessories and fittings for a complete power distribution system. In addition to having a high fault current carrying capacity, has the widest available range of ampere ratings and voltage classes for any made-to-measure power distribution system.

Electrical conducting cables carry currents of between 400 to 6000 amperes per phase at typical voltages of 600 volts to 35 kilovolts and higher.

is a cable bus system that maintains the free air rating by utilizing the only CSA certified ventilated enclosure available. The all-welded metal enclosure is available in Aluminum Alloy, Stainless Steel or Galvanized (HDGAF) Steel.

All of our fully engineered systems include the necessary equipment connections, entrance fittings, tap boxes, flanges, power cables, wall entrance seals, fire stops, elbows, terminal lugs, termination kits, supporting structures and any miscellaneous parts that would be required for a complete power feeder system.

comes in standard lengths of 10 or 20 foot spans but custom lengths are an available option, with each piece being sized to fit for any installation. Our cable bus systems are suitable for both indoor and outdoor use. Conductor spacing and ventilation is maintained throughout the entire system.